Personal Vaporizer Store Bandung - Liquid/E-Juice/Battery/Cartomizer/iKit/Elego Twist

Warna : Stainless Steel

more info, visit

http://www.innokin.com/itaste134.html

Main Features:

Scale Display Wattage Scale display
wattage offers more intuitive control and more accurate performance

Variable Wattage
The wattage adjusted with the rotational wheel to 6.5W, 7W, 8W, 9W, 10W, 11W, 12W, and 12.5W

Battery Level Indicator
The iTaste 134 battery capacity is displayed via green, yellow, and red LED lights. Green = Fully ChargedYellow = Half DischargedRed = Charge Needed

High compatibility 510 connector
Will fit iClear10, iClear16, and iClear30 clearomizers, as well as standard 510 accessories

ON/OFF Battery Switch
Quickly clicking the power button three times will enable or disable the battery. Once enabled, holding down the button will activate the device.

Replaceable Batteries
The iTaste 134 supports 18650 batteries.

Other Features:
10-Seconds Cutoff, Short Circuit Protection, Reverse Battery Protection Circuit, etc.

Brass + SS Edition

DESIGN FEATURES:
Ergonomic Comfort & Grip Design
Unique Hexagonal Style
Lay Flat (No Roll) Surface Design
Signature Diamond Cut Bezel
Laser Engraved and Serialized

PERFORMANCE FEATURES:
25 MICRONS – 99.25% Silver Plated Copper Contacts
Precision Tooling 0.002mm Tolerance
Large Ø9.2 Surface Area Contacts

QUALITY FEATURES:
ISO 9001:2008 Certified Production
(Food Grade) SUS 304 Stainless Steel

ESSENTIAL FEATURES:
Dual Telescopic
Reverse Threaded Auto-Fire Locking Mechanism
M7 X 0.5 Pitch Tap
Deep Juice Well
Center Body (Gas/Heat Release) Vent Holes
Supports 18350-18650 Batteries
Floating Positive Contact Rod

Body Only

Made by HCigar

Bahan : Stainless Steel

Warna : Black

Variable Wattage: The rotational wheel adjusts wattage to the following: 7.0, 8.0, 8.5, 9.0, 9.5, 10.5, 11.0, 12.0, 12.5
Battery Level Indicator:
Reverse Battery Protection Circuit.
Built in 7A fuse for protection and stability.
Short Circuit Protection.( 0.6 +/-0.2 ohm )
ON/OFF battery switch.
LED Battery Power Display.
Low Voltage Warning.
Overtime Vaping Warning (10 seconds switch cutoff).
Battery safety protection (Vent holes).
High compatibility 510 connector: Will fit iClear10, iClear16, and iClear30 clearomizers, as well as standard 510 accessories
Dimensions: 3-1/4″L x 1-1/2″D

Body Only

for more info, visit http://www.innokin.com/itaste-svd-express-kit.html

Features :

copper+black,
copper pin
18350/18490/18650
gift box

Features :

stainless material
silver plated pin
with logo,serial number
CE, Rohs

Features :

- Top cap with air control ring,

- bottom cap with lock ring

- Pure stainless ( brush )

Features :

Angular style design of the top & bottom caps

Spring loaded bottom fire button

Bottom locking ring

510 threaded connector

Full mechanical mod with no circuit board

Silver plated pins

Crafted from 304 Food Grade Stainless Steel
Manufactured in an ISO 9001 compliant facility to ensure you will receive the best possible device
3 1/2 twists and one or two flips will convert the device to support different battery modes
Battery Mode Support: 500, 500+Kick, 650, 650+Kick (and Kick 2)
No extra tube will be needed for the Kick or Kick 2
24k Hard D Gold Plated Brass contact
Floating and adjustable contact
3D Engraving – as deep as 2mm in some areas
This is NOT laser engraving. The tube is milled in a CNC machine. Total machine time is approximately 25 minutes to complete the engraving.
Upgraded power button

tidak termasuk driptip